Gaining a better understanding of the best oil filters for synthetic oil can lead to an improved engine performance and higher mileage. In general, the best oil filters will reduce contaminants from entering your engine and improve their removal from your engine’s oil. Discover the best oil filter for 6.7 Powerstroke in the following buying guide.
People are often confused about what defines an absolute or nominal micron rating in oil filters, but it’s really very simple. A nominal micron rating means that 99% of particles in this size range will be captured by the filter while an absolute micron rating means that 100% of particles in this range will be captured by the filter. If your vehicle requires an absolute micron oil filter, make sure you buy one with this rating.
Oil filters should be replaced with each oil change, and the best oil filters will protect your engine from environmental contaminants such as dirt, sand and water. If the best oil filter for your vehicle doesn’t have a great micron rating or other superior characteristics, then it won’t do much good at all. As always, read the reviews before buying an oil filter so you can ensure it is best for your truck. Listed below are some of the best rated oil filters for your 6.7 Powerstroke oil change.
The best way to find out which filter works best for your car is to check its owner’s manual or ask a certified mechanic . You might also want to consider purchasing an OEM (original equipment manufacturer) part as they are designed specifically for each individual vehicle by the same company that manufactured it.
Each truck manufacturer has their own brand of oil filter that best matches the oil filter best for each make and model. For example, Ford Super-Duty trucks come with a Motorcraft oil filter best suited for them.
Below are some of the best oil filters for synthetic oil in the 6.7 Powerstroke Ford diesel engine.
Best Oil Filter for 6.7 Powerstroke Buying Guide
Motorcraft FL-2051S
The Motorcraft FL-2051S achieves an effieciency of 98% at 18 microns and holds up to 29 grams of contaminants. The filter has a 20 microns absolute rating. It is made with 100% microglass media and has a silicone anti-drain back valve.
- Large media area Provides optimal capacity and efficiency
- Fluted case end Helps make removal easier
- Well bonded end plates Help keep consistent pleat spacing
- Perforated steel center tube Helps prevent collapse under pressure
- Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil
- Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine
- Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged
- Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust
- Top rated filter by the manufacturer for 6.7 Powerstroke oil change
Napa Gold 7151 Oil Filter
The Napa Gold 7151 has a filtering efficiency of 99% at 23 microns and can hold 18 grams of dirt. It is made with Microglass media and has a flexible silicone anti-drain back valve.
The filter has a Beta Ratio of 2/20/75 = 3/12/17
- NAPA Gold Oil Filters Provide Excellent Engine Protection Using Conventional, Synthetic, or Synthetic-blended Motor Oils, As Recommended By The OE Vehicle Manufacturer
- Laboratory Test Performance per ISO 454812: 18 Grams Dirt (NAPA Gold # 1515), 99% Efficient At 23 Microns (Based On NAPA Gold # 1515, 1356, 7060) – Has 13 Lb. By-Pass Relief Valve
- Use For Normal And Severe Driving Conditions Such As Stop And Go Traffic, Dirt Roads, Construction Sites, Short Trips And Interstate Travel
- This Filter Traps Up To 50% More Dirt And Contaminants Than ProSelect w/ The Best Combination Of Capacity & Efficiency For Severe Conditions. Use Gold For Manufacturer OE Recommended Oil Change Intervals
Fleetguard LF17494 Oil Filter
The Fleetguard Brand is a division of Cummins Filtration which has been defining quality filtration products since 1963. The Fleetguard LF17494 Oil Filter specifications on micron ratings are 100% efficiency at 30 microns and 60% efficiency at 10 microns.
- Contains the Stratapore Filtration Media that is a multi-layered filter media
- Oil filter media provides the optimum number of layers for particle removal
- Oil filter provides a nearly 50% reduction in restriction during cold starts
- It allows truck owners to extend service intervals without compromise
- Cummins Filtration provides lube products that meet and exceed OE performance requirements and the new challenges of modern engine technology.
Baldwin B7379 Oil Filter
Baldwin lube filter spin-ons protect your engine from wear particles that can otherwise lead to premature parts failure. Longer drain intervals requires filters that have both high capacity and the ability to withstand the rigors of time and temperature without failing or going into bypass. Baldwin’s lube filters are up to the challenge.
- Micron Rating 8 Absolute
- Includes 20 PSID By-Pass Valve
- Anti-Drainback Valve
- Length 6 7/16 in
- Outside Dia. 3 11/16 in
- Compatible Competitor Part Number: Motorcraft FL2051
6.7 Powerstroke Oil change recommended intervals
Replace engine oil & oil filter 10,000 miles or as indicated by the instrument cluster message center
(Intelligent Oil Life Monitor system will adjust interval to driving conditions)
Read about engine oil filter ratings in this related article.
1 thought on “Best Oil Filter for 6.7 Powerstroke”
Comments are closed.